Before removing the processor board, check the following areas: Check 24V SA fuse Check terminal block to see if #1 wire is seated firmly in place...
Category - Repair
Before removing the processor board, check the following areas: Use output test to verify problem Check the 24 VAC fuse Replace the comparitor, and...
Before removing the processor board, check the following areas: Verify the problem by checking the input test in the self test mode Check to see if...
Before removing the processor board, check the following areas: Verify that the wires to the hopper motor are connected Verify that the roll-pin is...
Before removing the processor board, check the following areas: If the machine is operating correctly, verify the operation of the hopper in the...
Before removing the processor board, check the following areas: Verify optic alignment Use input test to verify if the phototransistor is good (use a...
TOP VIDEOS
