IGT PE+ Poker: Bill Validator Won’t Accept Bills (No Vend Signal)

Before removing the processor board, check the following areas:

• Verify the problem by checking the input test in self test mode
• Visually inspect wires and connectors
• Verify that the validator is enabled – see output test

If that doesn’t work, try the following steps:

• Replace the validator with a “known good” one
• Replace the processor board with a “known good” one
• If the processor board seems bad, check eBay for replacement or repair service
• If the processor board is good, then replace the motherboard
• To repair the motherboard, use this diagram to isolate the bad trace
• If the motherboard and processor board are good, then use this diagram to test for wire continuity